There is no shaft disassembly or machining involved and costly downtime is minimized. Since the same sized seal as the original can be used, there is no need to search for other seals, or keep a stock of different sizes. No special equipment is required since the installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that is needed for the installation. Size range The standard size range covers sleeves for shaft diameters from 11,99 to 203,33 mm (0.472 to 8 in.). Depending on production quantities, non-standard sizes can be manufactured. Each sleeve is designed to fit a specific shaft diameter range, usually above and below the nominal shaft diameter. This permits some flexibility to accommodate variations in the actual shaft diameter.
| Designation | Principal dimensions | ||
|---|---|---|---|
|
|
d
[mm]
|
F
[mm]
|
B
[mm]
|
| IR 50X60X25 EGS | 50 | 60 | 25 |
| IR 55X65X28 EGS | 55 | 65 | 28 |
| IR 60X70X25 EGS | 60 | 70 | 25 |
| IR 65X75X28 EGS | 65 | 75 | 28 |
| IR 70X80X25 EGS | 70 | 80 | 25 |
| IR 100X110X30 EGS | 100 | 110 | 30 |
| IR 130X145X35 EGS | 130 | 145 | 35 |
English
русский
info@s-fou.com